What Makes This Good Stuff
Reverse Osmosis water filters provide super-high levels of filtration. Many people are concerned about high sodium, fluoride, nitrates, chlorine, chemicals, radionuclides, and even pharmaceuticals and prescription drugs that might be in tap water. Reverse Osmosis is a process of forcing tap water through a semi-permeable membrane, leaving dissolved solids and other impurities behind. These impurities are rinsed away, resulting in clean, clear, great tasting water.
This system is superior to most other similar looking systems. We use a high-production membrane. While most reverse osmosis systems use a 10 or 12 gallon per day membrane, we offer 50, 75 or 100 gallon per day production rates. Why? While 12 gallons per day sounds like plenty of water, it’s the production time you need to consider: it takes the 12 gallon per day (gpd) membrane over 2 hours to make one gallon of water, while it takes our 50 gpd membrane about 30 minutes to make one gallon, the 75 gpd membrane about 20 minutes to make one gallon and the 100 gpd membrane only 15 minutes (@ 65 psi and 77� F)! Most storage tanks only hold about 2 gallons of water, so you can see that during heavy use times (company) you could be out of water for some time with a slow membrane!
Also: our system includes a 4 gallon, NSF listed, Amtrol storage tank – large capacity but compact: 11″ dia x 15″ tall. Most other similar systems only come with a 2 gallon tank. Our larger tank, combined with superior production times means that you will rarely run out of water.
Reverse osmosis system space requirements: Main unit is 18″ tall x 14″ wide x 6″ deep, storage tank is 11″ diameter X 15″ tall (a 3′ tube connects them – they can be on opposite sides under your cabinet). 5 year warranty on hardware, 2 years prorated on membrane.
All reverse osmosis systems are placed out of the way, under the sink. They connect to the cold water line with an “EZ stop-valve connector” (not a leak-prone saddle valve like many competitors) and dispense water through an attractive long reach LEAD-FREE* solid brass premium faucet (not a cheap plastic flip-lever like most of our competitors). Quick-connect fittings make for fast, easy installation. A 1/2″ hole is all that is needed for the faucet stud (all series), but a cover plate is included to accommodate larger pre-drilled holes (such as a vegetable sprayer hole).
ALL under counter filters include a PREMIUM SERIES chrome upscale faucet at NO EXTRA CHARGE! This elegant lead-free* solid brass faucet features a smooth quarter turn handle with a ceramic seat for a lifetime of service – no flimsy, cheap plastic flip-handle like most competitors! There is no spring, so the handle stays in the position you place it, like a regular faucet.