Haakaa Supplemental Feeding Tube & Pouch Set

This set includes:

• 5 x Silicone Feeding Tubes
• 1 x 120ml/4oz Silicone Feeding Pouch
• 1 x Silicone Pouch Stopper
• 1 x Polypropylene (PP) Tube Connector
• 5 x Polyoxymethylene (POM) Flow Controllers
• 1 x Medical Tape
• 1 x Polyoxymethylene (POM) Storage Case

Features

• Provides additional nutrition to baby while allowing mum and baby to continue breastfeeding
• Five soft and flexible tubes ensure one is always available
• Flow controller allows adjustment of milk flow speed
• 120ml squeezable pouch has a wide opening for easy filling
• Attachment loop secures the pouch to a bra strap
• Connector & cap direct milk smoothly into the tube while preventing leaks
• Leakproof stopper keeps milk safe inside the pouch at home or on-the-go
• Stimulates milk supply as baby feeds at the breast
• Minimal parts to set up and disassemble
• Safe in dishwashers, sterilizers, and boiling water
• BPA, PVC, and phthalate-free

Cleaning and Care

• Before first use, disassemble and clean the product, then place silicone components in boiling water for 5 minutes to sterilize. Wash before and after each subsequent use.
• To clean the tubing, fill the pouch with warm soapy water and connect the feeding tube as normal. Turn the pouch upside down and squeeze to let water flow through the tubing. Squeeze several times to flush through, and squeeze and roll the tube between fingers to ensure thorough cleaning.
• To rinse the tubing, fill the pouch with drinking-quality water and connect the tube. Turn the pouch upside down and squeeze water through the tube. Repeat as necessary. If water is trapped inside after cleaning, drain the pouch, reconnect the tube, and squeeze to flush it out. Clean tubing as soon as possible after feeding to prevent milk drying inside. Ensure all residual moisture dries completely.
• For other parts, hand washing in warm soapy water is recommended, though dishwasher safe. Rinse and dry thoroughly.
• To sterilize all parts (excluding the flow controller), use a steam sterilizer or boil in water for 2–3 minutes. Do not place the flow controller in boiling water or sterilizers. Do not use bleach-based agents, sterilizing tablets, or UV sterilizers.
• Use only soft bristle brushes or soft sponges for cleaning — hard scourers may scratch the surface.
• Store small parts in the dedicated storage box in a cool, dry place away from direct sunlight.

Caution — For your child's safety and health

WARNING!

• Always use with adult supervision. Only adults should attempt to feed babies using this product. Always check food temperature before feeding.
• Inspect before each use. Discard at the first signs of damage or weakness.
• Keep components not in use out of reach of children to avoid risk of suffocation and strangulation.
• Never attach to a baby or baby's clothing using any method — strangulation risk. This is a single-user product; use by more than one person without adequate cleaning may present a health risk.
• Non-original accessories are not recommended.
• Continuous and prolonged sucking of fluids can cause tooth decay.
• Take care when inserting the tube into the flow controller to avoid tearing.
• Replace the feeding tube regularly.
• To avoid choking risk, ensure the tube is well secured with the provided medical tape to prevent the baby from dislodging it.
• This product should only be used under the advice of a lactation professional. Always consult a medical professional for further guidance.
• This product is not a toy and should not be used for anything other than its intended purpose.
• Do not warm breastmilk or infant formula in a microwave oven — uneven heating may scald the infant.
• Do not forcefully squeeze or shake the pouch at any time.